1) Remove radiator cap when engine is cool.
2) Loosen radiator drain plug (1) to drain coolant if radiator is
equipped with drain plug. If radiator is not equipped with drain
plug, disconnect outlet hose from radiator to drain coolant.
3) Remove reservoir and drain.
4) Tighten drain plug securely or connect outlet hose to radiator.
Also install reservoir.
5) Slowly pour specified amount of coolant to the base of radiator
filler neck, and run engine, with radiator cap removed, until ra-
diator upper hose is hot. This drives out any air which may still
be trapped within cooling system. Add coolant as necessary un-
til coolant level reaches filler throat of radiator. Reinstall radiator
cap.
6) Add coolant to reservoir so that its level aligns with FULL level
line.
MAINTENANCE AND LUBRICATION
0B-9