4) Reverse removal procedure for installation.
5) Adjust water pump drive belt tension, referring to Section 6B.
6) Adjust A / C compressor belt tension, if equipped. Refer to sec-
tion 0B.
7) Adjust intake and exhaust valve lashes as previously outlined.
8) Adjust accelerator cable play. Refer to Section 6E.
9) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
10) Refill cooling system referring to Section 6B.
11) Connect negative cable at battery.
12) Verify that there is no fuel leakage, coolant leakage and ex-
haust gas leakage at each connection.
13) Confirm that ignition timing is within specification referring to
Section 6F.
ENGINE MECHANICAL (F8D ENGINE)
6A1-41
