REMOVAL
1) Remove engine assembly with transmission and engine mem-
ber from body as previously outlined.
2) Remove clutch cover, clutch disc and flywheel (1).
Special Tool
(A): 09924-17810
3) Remove crankshaft pulley, timing belt, timing belt inside cover
and crankshaft timing pulley.
4) Remove cylinder head assembly as previously outlined.
5) Remove oil pan and oil pump strainer as previously outlined.
6) Remove oil pump (1).
7) Remove oil seal housing.
8) Remove connecting rod bearing caps.
9) Loosen crankshaft bearing cap bolts in such order as indicated
in figure a little at a time and remove bearing caps.
10) Remove crankshaft from cylinder block.
ENGINE MECHANICAL (F8D ENGINE)
6A1-53
