6) Install right and left drive shafts, refer to Section 4.
7) Install stabilizer bar, refer to Section 3D.
8) Connect gear shift control shaft and extension rod to transmis-
sion case.
9) Install exhaust center pipe.
Tightening Torque
(a): 55 N·m (5.5 kg-m, 40.0 Ib-ft)
(b): 55 N·m (5.5 kg-m, 40.0 Ib-ft)
10) Refill transmission gear oil, refer to Section 0B.
11) Connect cables, hoses, wires and couplers which were dis-
connected in dismounting engine procedure.
Adjust accelerator play, refer to Section 6E1.
Adjust clutch pedal free travel, refer to Section 7C.
12) Install air cleaner assembly with air cleaner hose and breather
hose.
13) Install radiator with cooling fan and reserve tank, refer to Sec-
tion 6B.
14) Install engine hood and connect windshield washer hose.
15) Install front bumper.
16) Connect negative cable at battery.
17) Refill engine with engine oil, refer to Section 0B.
18) Refill cooling system with coolant, refer to Section 6B.
19) Evacuate and charge A/C system, refer to Section 1B (if
equipped).
20) Upon completion of installation, verify that there is no fuel,
coolant, transmission oil, engine oil or exhaust gas leakage at
each connection.
21) Check ignition timing and adjust it as necessary, refer to Sec-
tion 6F1.
ENGINE MECHANICAL (F8B ENGINE)
6A-47
