DISMOUNTING ENGINE
1) Release fuel pressure in fuel feed line, refer to Section 6.
2) Disconnect negative cable at battery.
3) Remove engine hood after disconnecting windshield washer
hose.
4) Remove front bumper, refer to Section 9.
5) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
6) Remove radiator with cooling fan and reserve tank, refer to Sec-
tion 6B.
7) Remove air cleaner assembly (1) with air cleaner hose (2) and
breather hose (3).
8) Disconnect following cables.
Accelerator cable from throttle body
Clutch cable from clutch release lever
Speedometer cable from transmission case
9) Disconnect following hoses.
Radiator outlet hose from outlet pipe
Radiator inlet hose from thermostat cap
Heater inlet and outlet hoses from heater unit (if equipped)
Fuel return and inlet hoses from pipes
Canister purge hose from canister purge control valve
ENGINE MECHANICAL (F8B ENGINE)
6A-5
