2) When installing the glass (2) to the bottom channel (1), coat
the channel with soapy water to tap it with a plastic hammer.
Glass-fitted position of the bottom channel is as shown below.
3) To install the glass, lower the regulator arm so that the regulator
arm roller (1) can go into the bottom channel (2).
4) After installing rear door outer weather strip and partition weath-
er strip, securely fix their ends specified below with adhesive.
1. Rear door outer weatherstrip front end
2. Rear door outer weatherstrip rear end
3. Partition weatherstrip rear end
5) Securely seal the door sealing cover (1) with adhesive (2).
6) Install the door window regulator handle (1) so that it has a 45
_
angle when the glass is fully closed, as illustrated below.
9-8
BODY SERVICE
