Camshaft Timing Belt Replacement
Replace belt with new one. Refer to SECTION 6A or 6A1 for re-
placement procedure.
CAUTION:
Do not bent or twist timing belt.
Do not allow timing belt to come into contact with oil,
water, etc.
Valve Lash Inspection
1) Remove cylinder head cover.
2) Inspect intake and exhaust valve lash and adjust as necessary.
Refer to Section 6A or 6A1 for valve lash inspection and adjust-
ment procedure.
F8D Engine
F8D Engine
F8B Engine
3) Install cylinder head cover and tighten bolts to specification.
F8B Engine
0B-6
MAINTENANCE AND LUBRICATION
Valve lash
(clearance)
When cold
(Coolant temp. is
15 – 25 C
or 59 – 77 F)
When hot
(Coolant temp. is
60 – 68 C
or 140 – 154 F)
(
)
specifica-
tion
Intake
0.13 – 0.17 mm
0.15 – 0.19 mm
(0.006 – 0.007 in.)
Exhaust
(0.005 – 0.007 in.)
0.14 – 0.18 mm
(0.006 – 0.007 in.)
Valve lash
(gap “a”)
When cold
(Coolant temp. is
15 – 25 C
or 59 – 77 F)
When hot
(Coolant temp. is
60 – 68 C
or 140 – 154 F)
(g )
specifica-
tion
Intake
0.13 – 0.17 mm
(0.005 – 0.007 in.)
0.15 – 0.19 mm
(0.006 – 0.007 in.)
Exhaust
0.15 – 0.19 mm
(0.006 – 0.007 in.)
0.16 – 0.20 mm
(0.006 – 0.008 in.)
