7) Remove rocker arm shaft (1) with intake rocker arms (2) and
rocker arm spring (3).
8) Remove camshaft housing (1), camshaft (2) and distributor. For
distributor removal, refer to Section 6F.
NOTE:
To remove camshaft housing bolts, loosen them in such or-
der as indicated in figure, a little at a time.
9) Remove exhaust rocker arms.
INSPECTION
Adjusting Screw and Rocker Arm
If tip of adjusting screw (1) is badly worn, replace it.
Rocker arm (2) must be replaced if its cam-riding face (3) is badly
worn.
Rocker Arm Shaft Runout
Using “V” blocks and dial gauge, check runout. If runout exceeds
its limit, replace rocker arm shaft.
Runout limit: 0.06 mm (0.0024 in.)
ENGINE MECHANICAL (F8D ENGINE)
6A1-27
