5) Caulk seal (1) at A using caulking tool and hammer.
A: Caulking
6) Hook return spring (1).
7) Apply grease to release bearing (2) inside and release shaft arm
(3), then set bearing.
“A”: Grease 99000-25010
8) Apply small amount of grease to input shaft spline (4) and front
end as well.
“B”: Grease 99000-25210
9) Set release arm (1) to release shaft aligning their punching
marks (2) and tighten nut (3).
Tightening Torque
(a): 13 N·m (1.3 kg-m, 9.5 lb-ft)
CLUTCH
7C-13
