BRAKE DISC
REMOVAL
Refer to WHEEL HUB, KNUCKLE AND BEARING in Section 3D.
INSPECTION
Check disc surface for scratches in wearing parts. Scratches on
disc surface noticed at the time of specified inspection or replace-
ment are normal and the disc is not defective if these are not seri-
ous. But when there are deep scratches or scratches all over the
surface, replace disc.
When only one side is scratched, polish and correct that side.
Brake disc thickness
Standard : 10.0 mm (0.394 in.)
Limit
: 8.0 mm (0.315 in.)
To check disc deflection, measure at 2 points on its periphery and
center with a dial gauge, while rotating the disc.
Limit on disc deflection : 0.15 mm (0.006 in.)
Special Tool
(A) : 09900-20606
(B) : 09900-20701
INSTALLATION
Refer to WHEEL HUB, KNUCKLE AND BEARING in Section 3D.
5-22
BRAKES