7) Remove timing belt outside cover.
8) For installation of timing belt, align 4 timing marks (1), (2), (3),
(4) as shown in figure by turning crankshaft.
9) Remove timing belt tensioner (5) and timing belt (6).
CAUTION:
D
After timing belt is removed, never turn camshaft
and crankshaft independently more than such an
extent as shown in figure. If turned, interference
may occur among piston and valves, and parts re-
lated to piston and valves may be damaged.
D
Never bend timing belt.
1. Camshaft allowable turning range
By timing mark,
. . .
within 90
_
from timing mark on timing belt inside cover on
both right and left.
2. Crankshaft allowable turning range
By timing mark,
. . .
within 90
_
from timing mark on oil pump case on both right
and left.
INSPECTION
D
Inspect timing belt for wear or crack.
Replace it as necessary.
6A1-16
ENGINE MECHANICAL (F8D ENGINE)
