MANUAL TRANSMISSION
7A1-5
4. Gear shift guide
case plate
5. REV select spring
(Compressed)
6. Gear shift & select
lever (In 5th position)
2. Shift cam
3. Return spring
(Expanded)
4. Case plate
5. REV select spring
(Expanded)
6. Shift & select
lever (N of
3rd – 4th position)
7. Guide bolt
3. Return spring
(Compressed)
4. REV select spring
(Compressed)
1. Shift & select shaft
3. Return spring
(Compressed)
4. REV select spring
(Compressed)
5. Shift & select lever
(In REV position)
6. Guide bolt
1) When gear is shifted to 5th speed, 5th & reverse gear shift cam
(2) turns clockwise with gear shift & select shaft (1) and it is
pushed up by cam guide return spring (3) to the position where
interlock guide bolt (7) prevents the cam from being shifted to re-
verse straight.
2) Shifting from 5th to neutral is available and further shift to re-
verse is interrupted.
However, when shift & select shaft (1) is moved to neutral of 3rd
– 4th position, shift limit cam mechanism is canceled as shown
in figure.
3) Selected position in neutral of 5th – REV is shown in figure.
While shift & select shaft (1) moves up to allow shift & select le-
ver (5) to shift in 5th or reverse position, shift cam (2) stays be-
cause of interference of guide bolt (6).
4) Now the mechanism is ready to be shifted to reverse without in-
terference of shift cam (2).
