Move the door latch striker (3) sideways to adjust to 0 mm the
door surface-to-body surface difference with the door closed.
1. Body
2. Door
4. Front side
In order to correctly obtain the door latch striker (1) position in
the fore-and-aft direction, increase or decrease the number of
spacers inserted between the body and the striker to adjust it.
The dimension “D” should be adjusted to 12.6 to 14.6 mm
NOTE:
Apply oil or grease to the striker joints periodically.
2. Shim
3. Door
4. Front side
5. Body
D: 12.6 – 14.6mm
DOOR
1. Upper hinge
2. Lower hinge
3. Door
4. Body
“A” : Oil point
REMOVAL
1) Remove the stopper pin upward by tapping with hammer.
9-12
BODY SERVICE