Connect extension rod (1) and gear shift control shaft (2) to
transmission assembly.
Tightening Torque
(a): 6 N
.
m (0.6 kg-m, 4.5 lb-ft)
(b): 33 N
.
m (3.3 kg-m, 24.0 lb-ft)
Install new exhaust pipe gasket and exhaust pipe (1).
Tightening Torque
(a): 55 N
.
m (5.5 kg-m, 40.0 lb-ft)
Install tie rod ends (1) to knuckles (2). Tighten castle nuts (3) until
holes for cotter pin (4) align but within specified torque and then
bend new cotter pins (4) as shown.
Tightening Torque
(a): 43 N·m (4.3 kg-m, 31.5 lb-ft)
NOTE:
Removed cotter pin should be replaced with new one.
Tighten tie rod end lock nuts (1) to specified torque.
Tightening Torque
(a): 45 N·m (4.5 kg-m, 32.5 lb-ft)
3B-14
MANUAL RACK AND PINION
