Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 99 / 322

Installation 2 - 51
Standard Turntable Power Washer v. 4.0 The MART Corporation
8. Press stop .
9. Turn off the main-power-supply disconnect switch, located on the outside of
the door of the electrical control panel.
10. To set the rinse timer and injector-pump speed control, refer to chapter
“Advanced Operations: Process-Control.”
6.7. Startup Problems
If you have any problems during the startup procedure, do the following:
·
Re-read this chapter ( "Installation" )
·
Refer to chapter "Troubleshooting"
·
Call MART
After you have completed startup with no problems, you are ready to run a wash cycle.
Refer to chapter
“Basic Operations.”