Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 125 / 322

Advanced Operations: Process-Control 4 - 13
Standard Turntable Power Washer v. 4.0 The MART Corporation
3. Rinse-System Control (optional ARC)
The Automatic Rinse System (ARC) is a fresh-water rinsing system. It is powered by
waterline pressure. It allows the operator to control rinse characteristics and the
application of a rust inhibitor by means of the chemical injector pump.
The following controls rinse time:
·
Amount of makeup water needed, due to water loss through
evaporation or drag-out.
·
Automatic rinse system (ARC) timer
In controlling rinse cycle time, water loss takes priority . The amount of makeup water
required determines the maximum rinse time allowed, if any.
Set rinse cycle duration by adjusting the automatic rinse cycle (ARC) timer, located in
the electrical control panel. Refer to Fig. 4-2.
WARNING! Disconnect power before opening the control
panel to make adjustments.
3.1. Setting the Rinse Timer
The rinse timer is an adjustable timer with a range of 0-10 minutes.
Fig. 4 - 3: Automatic Rinse Cycle (ARC) Timer Increments
Rinse
Timer (0-10min)