Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 112 / 322

Basic Operations 3 - 13
Standard Turntable Power Washer v. 4.0 The MART Corporation
Position Lock Pull the door open slowly , until it locks in the first position. Do not
open the door past the first position lock: this allows remaining
solution to drip into the reservoir, not onto the floor.
The position-lock handle is located at the bottom of the door.
Refer to Fig. 3-4.
Securing the Door Always be sure that the open door is locked in position:
· Visually check the position lock
- Or-
· Try to pull or push the door
2.12. Unloading Parts
Press the TURNTABLE JOG button to rotate and position the table for easier unloading.
Refer to Fig. 3-1.
Remove the cleaned parts.
3. Continuous Operation
To operate the washer continuously, repeat "2.4. Loading and Securing Parts" through
"2.12. Unloading Parts."
You may need to add chemical or perform maintenance. Refer to chapters "Advanced
Operations: Process-Control" and "Maintenance" in this manual.