Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 138 / 322

5 - 2 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v. 4.0
WARNING! Be sure that people performing maintenance are
qualified and trained for the task.
CAUTION! You must turn the main power supply OFF before
performing many maintenance procedures. BE SURE to turn
the main power supply back ON after you perform
maintenance.
CAUTION! If the main power supply is OFF for a time period
that exceeds the power-outage carry-over specified in the
vendor-supplied 7-day clock manual, be sure to re-set the
7-day clock (located inside the electrical control panel).
WARNING! Do NOT OVERLOAD the false floor or other
horizontal surfaces. The false floor is intended as a chemical-
solution cover ONLY! Horizontal surfaces are NOT designed
for walking or standing! Walking on the false floor, tank cover,
or other horizontal surfaces could result in serious injury or
death.
What You Will Learn In This Chapter
In this chapter you will learn the following about maintenance:
·
Service schedule, based on hours of washer operation
·
Performing maintenance and common washer adjustments
·
Sludge monitoring and clean-out
·
Heat-exchanger and suction tube (cleaning)
·
Heating elements (cleaning)
· Maintenance of options