Options
7 - 41
Standard Turntable Power Washer v.
4
.0
The MART Corporation
7.4. Maintenance
Every 40 hours of operation:
·
Check the filter elements. Replace dirty elements.
If you notice that cleaning results are not as good as usual, or that more time is
necessary, check the filter elements. If they are dirty, replace them.
If your washer is equipped with the optional pressure-differential gauge, replace the filter
when the pressure-differential has increased by 10 PSI (142 kg/cm
2
) or more.
7.5. Troubleshooting
This section contains tables on the following problems:
·
Wash load not clean
·
Solution leaks from filter cover
Problem:
Wash load not clean
Check This:
Probable Cause(s)
Filter
Dirty (change filter)
Fig. 7 - 20: Troubleshooting: Wash Load Not Clean
Problem:
Solution leaks from filter cover
Check This:
Probable Cause(s)
Cover gasket
Dirty (clean)
Cover clamps
Loose (tighten)
Fig. 7 - 21: Troubleshooting: Solution Leaks from Filter Cover
Summary of Contents for Cyclone 30 Series
