Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 309 / 322

- 13 -
Main Pump 1530 Frame Hardened Steel Throttle Bushing
Sym Part # PART DESCRIPTION
Part # Kit
1 “A” Kit Impeller
30220 “A” Kit
2 Volute
30281 “B” Kit
3 “A” Kit Suction head
51173 “C” Kit
4 “A” Kit Gasket (suction head)
6 53037 Backhead
10 Capscrew (suction head-casing and backhead-casing)
11 Plug (casing)
30 30300 Bearing frame
31 52306 Column
33 53203 Shaft
34 “B” Kit Shaft sleeve
35 Capscrew (column-backhead)
36 Capscrew (frame-column)
37 Lockwasher (column-backhead, column-base)
38 Lockwasher (suction head-casing,backhead-casing)
39 Capscrew (column-base)
40 Hex nut (column-base)
41 Washer (column-base)
42 Lockwasher (column-base)
60 Baseplate
61 52395 Intermediate 15HP-20HP
52390 Intermediate 30HP
52392 Intermediate 40HP-50HP
63 Hex head bolt (frame-intermediate)
64 Hex nut (frame-intermediate)
65 Hex head bolt (motor-intermediate)
70
72556/
71919 Coupling 40-50HP/ 30HP
71 Ring
A1 “A” Kit Impeller washer
A2 “A” Kit Impeller key
A3 “A” Kit Impeller stud
A5 “A” Kit Impeller jam nut
B1 “B” Kit Locking ring
B2 “B” Kit Slinger
B3 “B” Kit Throttle bushing
B4 “B” Kit Capscrew (locking ring-backhead)
B6 “B” Kit Setscrew (slinger)
G1 53044 Bearing cap
G2 "C" Kit Thrust bearing
G3 "C" Kit Radial bearing
G4 “C” Kit Bearing locknut
G5 “C” Kit Lip seal (bearing frame, column)
G6 "C" Kit Lip seal (bearing cap)
G7 Grease zerk
G9 Hex head bolt (bearing cap-frame)
G10 Plug
G11 Coupling key
G12 53045 Bearing cartridge
G13 Bearing lockwasher
G16 46790 O-ring