Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 254 / 322

Options 7 - 75
Standard Turntable Power Washer v.
4
.0 The MART Corporation
17. Rinse Wand
The Rinse Wand is an optional addition to the standard rinse system. Its purpose is to
manually rinse spot areas after a wash cycle.
The Rinse Wand consists of a gun-shaped handle with an extended tube that has a
spray nozzle at its apex. The spray wand is hand-operated. Whenever the operator
depresses the trigger, water from the supply line is released through the nozzle at line
pressure.
NOTE: The water from the wand is not heated, and contains no chemicals.
17.1. Theory of Operation
Supply-line water pressure powers the spray. The wand uses a two-gallon-a-minute
fan-shaped nozzle. Since water from spray is normally returned to the water reservoir, a
solenoid valve connected to the solution-level control system disallows spray-wand use
whenever the solution level is at the HIGH-HIGH (maximum) mark. A light on the
control panel indicates this condition.
17.2. Installation
This option is factory-installed.
17.3. Operations
After a cleaning cycle has completed, open the washer door to the first door-position
lock stop. Use the
jog button to rotate the turntable as you inspect the wash load for
any area that may need additional rinsing. If you find such an area, release the jog
button to stop the turntable.
WARNING! Be sure to wear protective gear (face shield,
gauntlet gloves, rubber apron)! Spray could be deflected back
at you and could contain chemical residue that could cause
serious chemical and scald-type burns to eyes and skin!