7 - 70
Installation, Operations, and Maintenance Manual
The MART Corporation
Standard Turntable Power Washer v.
4
.0
15. Rack and Fixture Set, or Small-Parts
Basket
All parts must be secured to the turntable during the cleaning cycle. To do this, use the
following:
·
Rack and fixture set
·
Small-parts basket
Refer to chapter
"Basic Operations - Loading and Securing Parts"
for information on
using securing devices.
15.1.
Theory of Operation
The rack and fixture set and small-parts basket are optionally available from MART.
Refer to the following two figures.
You may want to discuss your requirements with your MART representative, especially
before you alter or add to the basic configuration to customize it for an application.
15.2.
Installation
There is no installation required. The rack and fixture set and small-parts basket arrive
ready to use.
NOTE
: Large racks or fixtures may need to be assembled.
Summary of Contents for Cyclone 30 Series
