Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 59 / 322

Installation 2 - 11
Standard Turntable Power Washer v. 4.0 The MART Corporation
4. Leveling and Anchoring
The power washer should be placed on a flat floor suitable for "anchoring" the washer.
For example:
·
Concrete floor
·
Concrete pad
·
Steel structure
4.1. Leveling
Follow this procedure :
1. Find the leveling and anchoring feet (at each corner of the washer at floor
level).
2. Find the leveling bolt/nut and the anchor hole on each leveling and anchoring
foot. Refer to the following figure.
Fig. 2 - 2: Leveling and Anchoring Feet
Leveling Bolts
Anchor
Hole
Do Not Shim
Under Leveling
Bolt Foot
Machine Base Is
Not Part Of
Machine.
(FOR PHOTO ONLY)