Overview
1 - 19
Standard Turntable Power Washer v. 4.0
The MART Corporation
Fig. 1 - 5: Water Level Differences at Four Positions
3.2.9.
Power Washer Control System
This section discusses the power-washer control system and sequence of operation
when powered up for a wash cycle. Operator controls are located on the outside of the
(electrical) control panel, to the left side of the door. Major system controls are housed
inside the electrical panel. A number of system features are logically interdependent, in
order to help ensure safe operation of the washer.
This section is divided into the following parts:
·
Operator controls
·
Major components
·
Sequence of washer operation
·
Interdependent system features
·
Electrical schematics
See chapters on "
Installation"
and
"Advanced Operations: Process-Control"
for more
detailed information on using the control system.
Summary of Contents for Cyclone 30 Series
