
Options
7 - 23
Standard Turntable Power Washer v.
4
.0
The MART Corporation
3.5. Troubleshooting
This section contains tables on the following problems:
·
Water leaks onto cabinet roof
·
Center manifold assembly does not work
·
Center manifold light does not illuminate
Problem:
Water leaks onto cabinet roof
Check This:
Probable Cause(s)
Manifold hose
Cracked (replace)
Loose (tighten)
Rinse pipefittings
Broken tubing (replace)
Loose fittings (tighten)
Fig. 7 - 9: Troubleshooting: Water Leaks Onto Cabinet Roof
Problem:
Center manifold assembly does not work
Check This:
Probable Cause(s)
Superstructure
Damaged
Limit switch
Damaged (replace)
Electric solenoid
Burned out (replace)
Fuses
Blown (turn power
OFF
and pull out of electrical control
panel to check)
Relay(s)
Need to be tightened or replaced
Overload
Tripped (reset)
Chain jammed
Brake not releasing
Fig. 7 - 10: Troubleshooting: Center Manifold Assembly Does Not Work
Summary of Contents for Cyclone 30 Series
