Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 107 / 322

3 - 8 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v. 4.0
Position Lock Pull the door open slowly , until it locks in the first position.
To lock the door in the second position:
1. Rotate the position-lock handle upward to release the lock
from the first position.
2. Move the door back slowly .
3. Release the position lock .
4. Continue pushing the door until it locks in place.
The position-lock handle is located at the bottom of the door. The
two position locks hold the door open at approximately 60
°
angle
and 90
°
angle, respectively, from the front of the cabinet. Refer to
the following figure.
Securing the Door Always be sure that the open door is locked in position:
·
Visually check the position lock, or
·
Try to pull or push the door
Fig. 3 - 4: Cabinet Door Position Lock
DOOR
HANDLE
DOOR
POSITON
LOCKING
ARM