
Welcome and Introduction
Welcome - 3
Standard Turntable Power Washer v. 4.0
The MART Corporation
At the end of the manual you will find an
Index
. Use it to find information quickly.
How to Use This Manual
Read the entire manual
before
you attempt to install, operate, or maintain the power
washer. This will provide the foundation you need to understand how the washer works
and how to use it to your best advantage.
Staff members who are responsible for specific features or functions will benefit from
paying special attention to corresponding information in the manual.
After you have read the entire manual thoroughly, use the
Table of Contents
,
List of
Figures
, and
Index
to refer to information, as you need it.
MART Technical Services
MART's technical services department is available to provide you with the extra support
you might occasionally need.
If you have a question about the washer or its operation, first look in this manual and in
other printed product-support documentation. If you cannot find the answer, contact
MART Technical Services
. Our phone number is on the title page near the beginning of
the manual, and in the following section,
"Other Resources -- HELP."
Before your power washer is delivered, you will receive a courtesy call from MART
technical services. Our expert engineers and technicians will review your specifications
and answer questions about placement planning, installation, utility and service
requirements.
Summary of Contents for Cyclone 30 Series
