Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 231 / 322

7 - 52 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v.
4
.0
6. Refer to the vendor-supplied cutsheet for instructions on setting fan speed.
If your washer is equipped with HABO, it is also equipped with auto steam
exhaust (ASE). An added benefit of HABO is that you can also use the
HABO steam-exhaust fan-speed control to adjust the amount of steam
exhaust during ASE cycles.
NOTE: If you set the ASE higher than the absolute minimum required for the
desired rinse cycle, the steam exhaust wastes energy and raises operating
costs. Initially, set the ASE speed control to the lowest setting that will
satisfactorily keep steam in the washer during operation. If this setting does
not provide an adequate rinse, adjust it higher for longer rinse cycles.
9.4. Maintenance
Every 1100 hours of operation:
· Oil the HABO blower motor with a standard electric-motor oil, suitable
for small electric motors. For example, 10W-50 SAE oil.
Refer to the vendor-supplied cutsheet for grease/oil points.
·
Inspect and clean the electric heating coils:
·
Turn the main power supply OFF .
·
Remove the coils from the upper plenum .
·
Carefully clean any debris from the coils.
·
Insert the coils back in the upper plenum.
· Turn the main power supply ON .