Options
7 - 61
Standard Turntable Power Washer v.
4
.0
The MART Corporation
11.2.
Installation
Follow this procedure
:
1. Unpack the
skimmer assembly
from the turntable inside the washer cabinet.
2. Set the
assembly
into the
skimmer box
.
3. Tighten the
wing nut
.
4. Attach the
grounded plug to the outlet
on the
washer
.
11.3.
Operations
The Oil Skimmer is designed to operate when the washer is in use,
or
after hours, when
the washer is in "shut-down" (
off
) mode.
To operate the Oil Skimmer,
follow this procedure
:
1. Set the skimmer's
selector switch
, located on the washer's control panel, to
one of the following:
·
Manual:
Activates the skimmer. It will run continuously.
·
Off:
Turns the skimmer off.
·
Auto:
Automatically activates and runs the skimmer
according to the program set for circuit #2 of the 7-day
clock.
NOTE
: You
must
program the 7-day clock's circuit #2
for
ON/OFF
times, and set the skimmer's selector
switch to
auto.
NOTE:
Oil skimming works best when the emulsified oils are allowed time to float and
collect on the surface of the solution. Program your 7-day clock circuit #2 to run the Oil
Skimmer several hours after washer shutdown in order to achieve the best oil-skimming
results. Also, some defoamers float on the surface at higher temperatures. By
skimming when the solution is cooler, less defoamer will be skimmed off with the oils.
Summary of Contents for Cyclone 30 Series
