Mart Cyclone 30 Series, Installation, Operation And Maintenance Manual, Page: 57 / 322

Installation 2 - 9
Standard Turntable Power Washer v. 4.0 The MART Corporation
3. Unpacking
After you have placed the washer in the installation site, unpack it. Check the packing
slip (attached to the washer) to see
what to look for.
Note: Most items and accessories are shipped in the washer
cabinet on the turntable.
Follow this general procedure :
1. Remove the packing material from the outside of the washer cabinet.
2. Unlatch the cabinet door and open door slowly and carefully.
Note: Some items secured to turntable may have shifted during shipment.
3. Remove the cartons strapped to the turntable.
4. Check all standard items, accessories, and documentation against the
packing slip. Refer to Fig. 1-1 and Fig. 1-2 to identify major components.
5. Open the electrical control panel. In a pocket on the inside of the door you
should find the following:
·
Vendor cut sheets and manuals
·
Field Startup Procedure (FSP) form
·
SBO (Service By Others)
· Electrical Ladder Diagram
· Washer Manual
·
BOM (Bills Of Material)
·
Cover Letter
·
Sample Warranty
6. Look on the outside of the electrical-control-panel door to find the service
schedule.