MTS-1730 INPUT/OUTPUT SIGNAL CONDITIONER
B-4 MTS-1700 SERIES OPERATION AND REFERENCE MANUAL
MANTA TEST SYSTEMS
CU A002 15A
8. OUTPUT CHANNEL TERMINALS
Normally open contact output. Ratings depend upon type of output module installed. See Section B.3.
9. OUTPUT STATUS LED/TEST PUSHBUTTON
The LED indicates when the associated output channel is in the “on” (closed state). The test pushbutton
will force the output channel to the “on” (closed) state.
B.5 REAR PANEL
FIGURE B-2. MTS-1730 REAR PANEL LAYOUT
1. OUTPUTS CONNECTOR
Control signals for output channels. Connect to the MTS-1710 [AUX OUTPUTS] connector, using the
appropriate cable.
Connector: DB-25 Female
Pinout:
Pin
Signal
1
signal ground
2
don’t use
3
AUXOUT15
4
AUXOUT13
5
AUXOUT11
6
AUXOUT9
7
AUXOUT7
8
AUXOUT5
9
AUXOUT3
10
AUXOUT1
11
no connection
12
no connection
13
no connection
2. INPUTS CONNECTOR
Conditioned input channel signals. Connect to the MTS-1710 [AUX INPUTS] connector, using the
appropriate cable.
Pin
Signal
14
signal ground
15
AUXOUT16
16
AUXOUT14
17
AUXOUT12
18
AUXOUT10
19
AUXOUT8
20
AUXOUT6
21
AUXOUT4
22
AUXOUT2
23
AUXOUT0
24
no connection
25
no connection
1
2 3
4
5
6