OPERATION SUMMARY - Section 3
MTS-1700 SERIES OPERATION AND REFERENCE MANUAL 3-5
CU A002 15A
MANTA TEST SYSTEMS
33. [I2 OUTPUT] TERMINALS
These output terminals provide the I2 output current in the I2-HARMONIC and I1&I2 current
modes.
34. [I3 OUTPUT] TERMINALS
These output terminals provide the I3 output current in the I3 and I3-WYE current modes. They’re
actually the same terminals as the I1 and I2 output terminals. The terminals are simply interpreted
as A, B, C and N outputs (marked in red). The internal single phase current is switched to the
appropriate A, B, C and N terminals based upon the selected FAULT MODE.
35. [AC VOLTAGE OUTPUT LIVE] LED
This LED indicates when AC voltage outputs are potentially live.
[VOLTAGE MONITOR] OUTPUT TERMINALS (Not illustrated, older MTS-1710 systems only)
These terminals allow an external voltmeter to monitor the active voltage (selected by the FAULT
MODE selectors).
36. [VOLTAGE OUTPUT] TERMINALS
These are the 3-
Φ
wye-connected output voltage terminals.
37. COOLING INTAKE
3.2 REAR PANEL LAYOUT
FIGURE 3.2 REAR PANEL LAYOUT
AUX OUTPUTS
AUX INPUTS
MTS-1750
COM 3 SLAVE CURRENT
COM 2 RS-232C
COM 1 RS-232C
MAINS
F15A
SLAVE CURRENT IN
POWER OFF
BEFORE
CONNECTING/
DISCONNECTING.
ROTATE TO LOCK
BEFORE USE
SIGNAL INPUT
1
2
3
4
5
6
8
7
10 11
9