Daisy Pool Covers
Phone: 1300 55 18 11
daisypoolcovers.com.au
Below Ground Pool Cover Box installation guide
Items you will need to install the box, 2 ropes or straps to carry and lift box, shovels, tape measure, spirit level or
levelling device, rubber mallet, 17mm socket or spanner, 2 concrete slabs 450mm x 450mm or 300mm x 600mm and
blue metal or stone aggregate equivalent (approx. 2 bags per 1m)
1.
Prepare dig zone by removing pavers if being installed into pre paved area.
2.
Dig trench to minimum of 550mm wide, 555mm deep and at least 300mm past either side of the pools
waterline edge.
For example if pool is 4000mm wide dig trench 4600mm long.
3.
If space is restricted on one side place box at least 100mm past the pool edge or as far as possible if pool
wall is on a boundary, please ask us for advice on placement in restricted space circumstances.
