MTS-1730 INPUT/OUTPUT SIGNAL CONDITIONER
B-10 MTS-1700 SERIES OPERATION AND REFERENCE MANUAL
MANTA TEST SYSTEMS
CU A002 15A
B.8.2 Input Bank Configuration and Numbering
Input bank configuration and numbering is determined by the position of installed 16-channel input
modules, and jumpers plugs installed on the backplane internal to the MTS-1730.
Possible configurations are shown in the chart below:
Input Bank Configuration and Numbering
Internal Jumpers
Required
None
RJ4
RJ2, RJ5
RJ1, RJ3, RJ6
RJ1, RJ3, RJ6
(and remove U2
and U3 IC’s)
4 channel modules
Bank 0 (ch 0-7)
2
Bank
1
Bank
16 channel
modules
4 channel modules
BANK 0 (ch 0-15)
Bank
0
Bank
1
Bank
2
Bank
3
4 channel module
Bank 0 (ch 0-3)
modules
16 channel
3
Bank
2
Bank
1
Bank
0
Bank
16 channel
modules
16 channel module
Bank 1
4 channel modules
Bank 0 (ch 0-11)