MTS-1730 INPUT/OUTPUT SIGNAL CONDITIONER
MTS-1700 SERIES OPERATION AND REFERENCE MANUAL B-5
CU A002 15A .
MANTA TEST SYSTEMS
Connector: DB-25 Male
Pinout:
Pin
Signal
1
no connection
2
no connection
3
no connection
4
AUXIN1
5
AUXIN3
6
AUXIN5
7
AUXIN7
8
AUXIN9
9
AUXIN11
10
AUXIN13
11
AUXIN15
12
don’t use
13
signal ground
3. AUX CONNECTOR
Reserved for future expansion.
4. AC INPUT RECEPTACLE
This is the main AC input receptacle.
5. MAINS INPUT FUSE
This is the main AC input fuse. Replace only with a fast blow, 1A/250VAC fuse.
6. SAFETY GROUND TERMINAL
B.6 CHANNEL ASSIGNMENTS AND SPECIAL FUNCTIONS
The input and output channels of the MTS-1730 are numbered from 0 to 15 from left to right, top to bottom.
See the legend on the far left of the front panel for reference.
When used with the MTS-1710, the following channels have special capabilities:
Input Channels 0-6:
Can function as external start triggers. This feature is enabled/controlled by the
DIO,STR#
RS-232 command.
Input Channels 0-15:
Can function as external stop triggers. This feature is enabled/controlled by the
DIO,STP#
RS-232 command.
Output Channel 15:
Can function as a programmable square wave output for use as a phase comparison
signal. See Section A.6.5 for details on this function.
When this feature is desired, the output module should be a high speed type (Option
-03D2 or -03D3).
Pin
Signal
14
no connection
15
no connection
16
AUXIN0
17
AUXIN2
18
AUXIN4
19
AUXIN6
20
AUXIN8
21
AUXIN10
22
AUXIN12
23
AUXIN14
24
no connection
25
signal ground