Be careful not to touch front/rear blade when changing the blade so as to avoid unexpected accident.
N.B. Screw Driver with magnet is recommendable, enabling easy operation to secure screws
when attaching the blade unit.
１．How to change front/rear blade of LABOKEY 7200
1-1 How to detach the Blade Unit Cover
Remove screws(3pcs) and detach the Blade Unit Cover as illustrated below.
Fixing Screws(3pcs) Blade Unit Cover
1-2 How to detach the Fixing Screws of Blade Unit
You can see the fixing screws(2pcs) from the top(as shown on the left picture)
Slightly push down the Lever and detach the screws(2pcs)of Blade Unit while gently fitting the Blade
Unit with the Blade Receptacle Board of the Film Guide Section(as shown on the right picture)
Blade Unit will be fit into the Film Guide Section.
Lever
Fixing Screws(2pcs) of Blade Unit
Blade Unit
Film Guide Section
1-3 How to detach Film Guide Section and Blade Unit
Detach the Bottom Cover and remove fixing screws(4pcs)of Film Guide Section(as shown on the left
picture), then remove the Film Guide Section and the Blade Unit.
Fixing Screws(4pcs)of Film Guide Section
- 1 -
LABOKEY 7200 RESHAPER/HOW TO CHANGE BLADE
