Keithley SourceMeter 2400, User Manual

Page: 57 / 594

1-20 Getting Started 2400 Series SourceMeter
®
User’s Manual
Remote setups
You can also save and recall setups via remote using the following SCPI commands:
• Save and recall user setups using *SAV and *RCL ( Section 16 ).
• Restore GPIB defaults using *RST ( Section 16 ).
• Restore bench defaults using :SYSTem:PRESet ( Section 18 ).
• Save the power-on configuration using :SYSTem:POSetup ( Section 18 ).
Menus
The following paragraphs discuss the main menu, configuration menus, and rules to navi-
gate menus.
Main menu
Use the MENU key to access the Main Menu to select, configure, and/or perform various
instrument operations. These include default setup conditions, communications (GPIB or
RS-232), calibration, front panel tests, digital output states, auto zero, timestamp, numeric
display format, and the beeper.
The overall Main Menu structure is summarized in Table 1-5 . Use the “ Rules to navigate
menus ” to check and/or change Main Menu options. Figure 1-3 shows the main menu tree.
Table 1-5
Main menu
Menu item
1
Description Parameters
SAVESETUP
GLOBAL
SAVE
RESTORE
POWERON
BENCH
GPIB
USER SETUP NUMBER
RESET
SOURCE MEMORY
SAVE
RESTORE
Configure setup conditions.
Control instrument settings.
Save present SourceMeter setup to memory location.
Return the SourceMeter to setup saved in memory.
Select the power-on default setup.
Powers-on to BENCH defaults.
Powers-on to GPIB defaults.
Powers-on to user setup.
Returns unit to BENCH or GPIB defaults.
Control memory sweep source setup configurations.
Save present setup configuration to memory location.
Return to configuration saved in memory location.
0 to 4
0 to 4
See Table 1-4
See Table 1-4
0 to 4
See
Table 1-4
1 to 100
1 to 100
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com