![background image](http://html2.mh-extra.com/html/keithley/sourcemeter-2400/sourcemeter-2400_user-manual_4037086564.webp)
2400 Series SourceMeter
®
User’s Manual
Contact Check Function
F-11
Auto clear off, immediate binning
Bin control at end of each point is sweep: :CALC2:CLIM:BCON IMM
The output will remain on between each sweep point if no contact check failure occurs. If
a contact check failure occurs before the execution of a sweep point, the output will be
turned off for that point. The test sequence will progress and perform a contact check on
the next point in the sweep. The output will not be turned on until a good contact is
detected.
Front panel contact check operation
Menu selections
Table F-2
summarizes the menu selections for various contact check modes. Note that
only those selections specific to contact check operation are shown here. See
Section 1
for
complete menu listings, and
Section 11
and
Section 12
for details on triggering and limit
testing, respectively.
Table F-2
Contact check menu selections
Menu item*
Description
CONFIG LIMIT
Configure limit tests.
CONFIGURE LIMITS MENU
DIGOUT
Set Digital I/O modes.
SIZE
Select 3-BIT or 4-BIT fail pattern size.
MODE
Select GRADING or SORTING mode.
H/W LIMITS
Control and set mode for Limit 1 and Limit 4 tests.
LIMIT1(CMPL)
Select Limit 1 (compliance) test.
LIMIT4(CCHK)
Select Limit 4 (contact check) test.
CONTROL
Enable/disable Limit 4 test.
DISABLE
Disable contact check limit test.
ENABLE
Enable contact check limit test.
DIGIO PATTERN
Set contact check Digital I/O pattern (0-7, 3-bit;
0-
15, 4-bit
).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for SourceMeter 2400
Page 589: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 591: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 592: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...