6
13
5
KEB COMBIVERT F5
Name: Basis
04.05.04
6
Section
Page
Date
©
KEB Antriebstechnik, 2002
All rights reserved
Chapter
Functional Description
CP-Parameter Definition
6.13.3 Example
As an example a user menu with the following features shall be programmed:
1. Display of current actual frequency (ru.3) in the respective set
2. Adjustment of a fixed frequency / fixed value (oP.21) in set 2
3. Adjustment of a fixed frequency /fixed value (oP.21) in set 3
4. Acceleration and deceleration time (oP.28/oP.30) for set 2 and 3
5. Energy saving factor (uF.7) shall be displayed in set 2 with display
standardization 4
1.)
ud.15 = 1
; CP.1
ud.16 = 0203h
; Parameter address for ru.3
ud.17 = 256
; Display in the active set
2.)
ud.15 = 2
; CP.2
ud.16 = 0315h
; Parameter address for oP.21
ud.17 = 4
; Setting in set 2
3.)
ud.15 = 3
; CP.3
ud.16 = 0315h
; Parameter address for oP.21
ud.17 = 8
; Setting in set 3
4.)
ud.15 = 4
; CP.4
ud.16 = 031Ch
; Parameter address for oP.28
ud.17 = 12
; Setting in set 2 and 3
ud.15 = 5
; CP.5
ud.16 = 031Eh
; Parameter address for oP.30
ud.17 = 12
; Setting in set 2 and 3
5.)
ud.15 = 6
; CP.6
ud.16 = 0507h
; Parameter address for uF.7
ud.17 = 4097
; Setting in set 0 and display standardization 4
6.)
ud.15 = 7
; CP.7
ud.16 = -1: off
; CP.7 not displayed
ud.17 = xxx
; ud.17 no function
Adjust all other parameter sets to „off“, so that no indication occurs.
The acceptance of the values takes place only after Power-On-Reset of the operator.