6
9
29
KEB COMBIVERT F5
Name: Basis
04.05.04
6
Section
Page
Date
©
KEB Antriebstechnik, 2002
All rights reserved
Chapter
Functional Description
Special Functions
6.9.8
Diameter
Correction
0
1
2
3
oP.44
Bit 4...7
AN1 (ru.28)
AN2 (ru.30)
AN3 (ru.32)
digital (oP.45)
oP.46
oP.47, 48
oP.49
0
1
2
oP.44
Bit 0...3
ru.2
Ramp output value
Setpoint
value
Wobbel generator
Diameter correction
Amplitude
Diameter signal
6.9.8 Additional function: Diameter correction
Through the use of the diameter correction the tool path feedrate of a winding product
can be kept constant at changing diameter of the reel bale.
Additional function / Mode
(oP.44 Bit 0...3)
Different functions can be activated with oP.44 Bit 0...3. The value is to be added to
Bit 4...7.
oP.44 Bit 0...3
Function
0
no external function activated
1
Wobbel generator (see Chapter 6.9.7)
2
Diameter correction activated
3...15
reserved
The input source for the functions is determined with oP.44 Bit 4...7. The value is to be
added to Bit 0...3.
oP.44 Bit 4...7
Function
0
Analog input AN1
16
Analog input AN2
32
Analog input AN3
48
Digital presetting with oP.45
Additional function / Source
(oP.44 Bit 4...7)
Additonal function
digital presetting (oP.45)
If the value „50“ (diameter correction with digital specification) is adjusted in oP.44,
the diameter signal can be preset with oP.45 within the range of 0...100 %.
(not at F5-B)