Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 83 / 148

ADM 6725 E10

KA T
7 - 13
Program Branch SPECIAL FUNCTIONS
edit
Install Material
>DELETE<
S12-1
Select and confirm DELETE.
MATERIAL
"
S12-4 Select and confirm the user-defined
material to be deleted.
(Silver for example)
The display group contains
•
the available user defined materials, e.g. silver,
•
the user defined materials that had earlier been deleted,
but were hidden in non-volatile memory, e.g. USER #2,
USER #3.
Silver (33.3%)
USER #2
USER #3
>NO<
Really Delete?
yes
S12-5 This display appears so that you can re-
think your decision to delete the user
defined material. Select and confirm
your choice by pressing ENTER.
FLUXUS will update its non-volatile memory within seconds. The MAIN MENU will
appear again.
7.9 Installation/Deletion of User Defined Media
FLUXUS allows the user to install 3 different media. There are 95 ASCII-
characters
(letters, capital letters, numbers, special characters [! ? " + - ( ) > < % * ~ etc.
]
available for the
designation of your medium, with a maximum of 16 characters per designation.
The user defined medium will appear in program branch PARAMETER under the
display group 'Medium', in addition to the media which can be found in the scroll
list by default. The user-defined media will be cold-start resistant stored in
memory and remain active even if the unit has been switched off.
7.9.1 Installing/Renaming
Special Funct.

Install Medium
S13
This display is to install/rename a user-
defined medium.
Confirm by pressing
ENTER.
>EDIT<
Install Medium
delete
S13-1
Select and confirm EDIT.