Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 8 / 148

C - 4
ADM 6725 E10

KA T
Table of Contents
13.2 Set-up of Pulse Output 13-4
13.3 Set-up of Alarm Outputs 13-5
Set-up of alarm properties 13-6
Set-up of the limit values 13-6
Apparent delays when switching alarm outputs 13-7
Cold Start 13-7
Disabling of alarm outputs 13-8
Alarm outputs during transducer positioning 13-8
Limit comparison with the measured value 13-8
Limit comparison for total flow quantity 13-8
Alarm output operation and update 13-9
14 Errors 14-1
14.1 Error Messages 14-1
14.1.1 Errors during Parameter Input 14-1
14.1.2 Errors during Measurement 14-2
14.1.3 Errors during Data Transfer of Measured Values 14-3
14.1.4 Errors during Input of Programming Code 14-4
14.1.5 Errors during Set-up of Date/Time 14-4
14.1.6 System Errors 14-4
14.2 Troubleshooting 14-5
14.2.1 Measurement is not successful 14-5
14.2.2 Measurements differ from the expected value 14-5
15 Maintenance, Service
15-1
16 Technical Data 16-1
Measuring instrument 16-1
Clamp-on flow transducers 16-1
Mains power adapter and battery charging unit 16-1
Units of measurement 16-1
Transfer of measured values 16-2
Measuring characteristics 16-2
Process interfaces (optional) 16-2
Wall thickness measurement (optional) 16-2
Wall thickness probe DA301, HT400 16-3
Heat quantity measurement (optional) 16-3
Integrated measuring point multiplexer 16-3
Flow nomogram 16-4
17 Tables 17-1
Table 1: Pipe parameters stored in FLUXUS 17-1
Table 2: Pipe parameters not stored in FLUXUS 17-1
Table 3: Typical roughness coefficients for pipes 17-1
Table 4: Media parameters 17-2
Table 5: Chemical resistance of polycarbonate foil (keypad) 17-3
Table 6: Resistance values for platinum 17-4
Table 7: Properties for water with pressure p = 1 bar and saturation 17-4