Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 74 / 148

7 - 4
ADM 6725 E10

KA T
Program Branch SPECIAL FUNCTIONS
7.2 Working with Parameter Records
Parameter records are data that contain all necessary information to perform a
certain measurement task. These data are:
•
Pipe parameters
•
(Transducer
parameters)
•
Medium parameters
•
Output options
Parameter records can be created before each measurement and then be stored
via SPECIAL FUNCTIONS. FLUXUS can store up to 14 different parameter rec-
ords. If you wish to work with a stored parameter record, you need to select that
record as "Current Record". This way, repeat measurement tasks can be
performed with previously entered parameters much more easily and quickly.
7.2.1 Save Current Parameter Record
The parameters need to be entered first as previously described in chapters
"Program Branch PARAMETER" and "Program Branch OUTPUT OPTIONS". If
this has been done, the parameters can be stored as the current parameter
record.
Special Funct.
"
Store Curr.Rec.
S4
Use display S4 of program branch SF to
store the entered data as current
parameter record. Confirm by pressing
ENTER .
Store Par. to:
"
Par.Record 01
S4-1
The display "Store Par. to:" appears and
offers a choice of 14 memory locations.
Confirm your selection by pressing
ENTER .
Should you select and confirm S4-15
"Don't Store", the current parameter
record will not be stored.
Par.Record 02 S4-2
... ... After pressing ENTER, FLUXUS leaves
program branch SF and returns to the
MAIN MENU.
Par.Record 14 S4-14
Don't Store S4-15
Overwrite
no >YES<
S4-16 Should the memory location be already
occupied by a stored parameter record,
FLUXUS asks to overwrite it.
!
Next memory
location
!
MAIN MENU