Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 33 / 148

ADM 6725 E10

KAT
4 - 1
Program Branch PARAMETER
4 Program Branch PARAMETER
The program branch PARAMETER begins and ends with the MAIN MENU. The
branch cycle consists of the following scroll displays and display groups
respectively:
•
Measuring channel (display group for multi-channel
versions)
•
Outside pipe diameter
•
Pipe circumference
•
Wall thickness
•
Pipe material (display group)
•
Lining (display group)
•
Pipe roughness
•
Medium (display group)
•
Medium temperature
•
Transducer type (display group)
The parameters for the measuring point must be entered separately for every
available measuring channel.
3100.0 MAXIMUM
Outer Diameter
(Example)
For each parameter, there are parameter limits,
which depend on the respective characteristics.
During data entry, FLUXUS indicates on the
display if these limits are being exceeded
(MINIMUM and MAXIMUM
plausibility check ).
Attention! FLUXUS only accepts the parameters for a measuring channel if the program branch
PAR has been gone through once completely.
When calling the program branch PARAMETER later on, the input parameters
may be edited again.