Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 81 / 148

ADM 6725 E10

KA T
7 - 11
Program Branch SPECIAL FUNCTIONS
Note: If you wish, you can now change the time setting again.
Otherwise: Confirm the newly set time with ENTER which will bring you back to the MAIN
MENU .
7.8 Installation/Deletion of User Defined Material
FLUXUS allows the user to install 3 different materials. There are 95 ASCII-
characters
(letters, capital letters, numbers, special characters [! ? " + - ( ) > < % * ~ etc.
]
available for the
designation of your material, with a maximum of 16 characters per designation.
The user defined materials will appear in program branch PARAMETER under the
display groups 'Pipe Material' and 'Lining Material', in addition to the materials
which can be found in the scroll lists by default. The user-defined materials will be
cold-start resistant stored in memory and will remain active even if the unit has
been switched off.
7.8.1 Installing/Renaming
Special Funct.

Install Material
S12
This display is to install/rename a user-
defined material.
Confirm by pressing
ENTER
>EDIT<
Install Material
delete
S12-1
Select and confirm EDIT.
MATERIAL
"
S12-2
Select one of three available memory
locations.
USER #1
USER #2
USER #3
EDIT TEXT( )
SER #1
% & ' (
U
S12-3 For the material designation, use the
following keys:
-
O + O
for moving the cursor to the
respective character.