Katronic Technologies FLUXUS ADM 6725, Operating Instruction, Page: 95 / 148

ADM 6725 E10

KA T
9 - 1
Super User Mode
9 Super User Mode
The Super User Mode gives you the opportunity for experimental work. In this
operational mode,
YOU
, not FLUXUS, will be responsible and must decide:
•
upon the observance of the parameter ranges, characterised by physical and
specification limits;
•
upon the correctness of data inputs;
•
upon the meaningfulness of measured values for measurements performed under
conditions which are outside the specification.
YOU
will need to take care that the measuring results are free from contradictions. In
other words: FLUXUS operates in Super User Mode without observing pre-set
standard parameters and limit values which normally guide you through the complexity
of ultrasonic flow measurement.
9.1 Activation/Deactivation of the Super User
Mode
The Super User Mode can be activated by entering a HotCode
(See chapter 2.4.4)
.
Parameter
>PAR< mea opt
sf
P1
Press key
BR K
when in the MAIN MENU.
NEXT DISP
MUX
-
O
Enter this key sequence from the MAIN MENU.
If you failed to enter the correct key sequence:
Press key . Repeat the above steps and
continue.
*IS ACTIVE NOW*
SUPERUSER MODE
When the HotCode has been entered correctly,
this message appears which indicates that the
Super User Mode is now active.
Confirm by pressing ENTER. The MAIN MENU
will appear again.
Parameter
>PAR< mea opt sf
P1
Start to enter or select parameters as described
in the Operating Instructions.
Deactivation: