Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 75 / 148

ADM 6725 E10

KA T
7 - 5
Program Branch SPECIAL FUNCTIONS
7.2.2 Selection of Parameter Records
If parameter records have been stored in memory, they can be easily retrieved.
Note: Stored parameter records are selected using the program branch PARAMETER .
Here are the display steps in detail:
Parameter
>PAR< mea opt sf
P1 Select and confirm from the MAIN MENU
program branch PARAMETER .
Current
Parameter from:
"
P2 The display "Parameter from:" will appear.
If you do not want to use a stored
parameter record but want to enter other
(the current) data, press
ENTER now.
Note: The above display appears only if at least one parameter record has been stored.
100.0 mm
Outer Diameter
P3 The next display requests the input of the
current parameters. The input sequence
starts with the outside diameter.
(See chapter 4 "Program Branch PARAMETER" for details)
Parameter from:
"
If you want to use a stored parameter
record instead, scroll through this list
and select the parameter record you
wish to perform your measurements
with.
P2*-15
)
Par.Record 01 P2*-1
P2*-15
)
Par.Record 02 P2*-2
P2*-15
)
... ... Confirm your choice by
P2*-15
)
Par.Record 14 P2*-14 pressing ENTER .
Parameter EDIT
no >YES<
P2*-
15
This display asks if you want to edit the
parameter record. Select and confirm
YES if you wish to do so.
100.0 mm
Outer Diameter
P3
Now, the display asks to edit the
parameters. The input sequence starts
with the outside diameter.
0 ... 9 input values
C delete
ENTER confirm
(See chapter 4 "Program Branch PARAMETER" for details)