Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 53 / 148

ADM 6725 E10

KA T
5 - 11
Program Branch MEASURING
5.3 Start of the Measurement
(53.8) 54.0 mm
Trans.Distance?
M7 Enter the exact transducer position for correct
sound velocity measurements.
Confirm this display by pressing
E NT E R
.
With this, the measurement starts.
If your instrument is a multi-channel version, there are two different operational modes to
be selected, AUTO-MUX or MANUAL-MUX.
AUTO-MUX
FLUXUS undertakes measurements on all activated measuring channels in a parallel
manner. This means that every second the multiplexer switches between the activated
channels to measure the flow. FLUXUS indicates the currently activated channel on the
upper left corner of the display (A, B, ...):
54.5 m3/h
A: Volume Flow
1.25 m/s
B: Flow Velocity
FLUXUS indicates the measuring values of those
measuring quantities and units that
have been selected in the program branch OUTPUT OPTIONS for the respective
measuring channel.
M UX
Using this key, the multiplexing mode can be
changed between AUTO-MUX and MANUAL- MUX.
You can recognise the selected mode easily as the activated channel is
shown every other second on the upper left corner of the display (A, B,
...) only in mode AUTO-MUX.
MANUAL-MUX
In this mode, FLUXUS will work on one measuring channel only. All other channels still
measure but there is no indication.
NEXT
Press this key and FLUXUS will change to another
(NEXT) activated measuring channel.
1.25 m/s
B: Flow Velocity
FLUXUS shows the activated measuring chan-
nel on the upper left corner of the display (A, B,
...).
FLUXUS indicates the measuring values of those measuring quantities and units that
have been selected in program branch OUTPUT OPTIONS for the respective measuring
channel.
5.3.1 Volume Flow
FLUXUS displays the volume flow in m3/h on default setting: