Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 37 / 148

ADM 6725 E10

KA T
4 - 5
Program Branch PARAMETER
#
Stainless Steel P5-2
#
Glass P5-3
#
Copper P5-4
#
Aluminium P5-5
#
Brass P5-6
#
Lead P5-7
#
Grey Cast Iron P5-8
#
Ductile Iron P5-9
#
Asbestos Cement P5-10
#
PVC P5-11
#
PE P5-12
#
PP P5-13
#
Bitumen P5-14
#
Rubber P5-15
#
Perspex P5-16
!
Other Material P5-17
Next display
P7 (Without pressing ENTER,
the display list scrolls around)
When a pipe material has been selected, FLUXUS jumps straight to the display for
choosing the pipe lining material. If the above list does not contain your pipe
material, the set-up can be done as follows:
Pipe Material
Other Material
"
P5-17 Scroll through to the display
'Other
Material' .
Confirm by pressing ENTER .
c-Material
3200.0 m/s
P6
FLUXUS requests the entry of the sound
velocity for the pipe material.
(Table 2 in chapter
17 gives an overview of the sound velocities for some
materials.)
Enter the data of the respective material
within a range from 600 to 6553.5 m/s
and confirm by pressing ENTER.
Then the display for entering the data for the pipe
lining material appears.
4.2.4 Pipe Lining
no >YES<
Lining
P7
Here, the instrument asks if the pipe is
fitted with lining material or not. If YES,
the following subdisplay group will be
shown.
Lining
"
P8
"
select
ENTER confirm
(The list of displayed materials can be different
as shown according to specific customer
request.)