1
THREE SELECTABLE D.C. RANGES
0 to 10 V, 0(4) to 20 mA, 0 to 50 mA
MINIMUM AND MAXIMUM DISPLAY CAPTURE
LCD, REFLECTIVE OR RED/GREEN LED BACKLIGHTING
0.48" (12.2 mm) HIGH DIGITS
OPTIONAL SETPOINT OUTPUT CARD
OPTIONAL SERIAL COMMUNICATION CARD (RS232 or RS485)
OPTIONAL USB PROGRAMMING CARD
OPERATES FROM 9 TO 28 VDC POWER SOURCE
FRONT PANEL PROGRAMMABLE
DISPLAY COLOR CHANGE CAPABILITY AT SETPOINT OUTPUT
NEMA 4X/IP65 SEALED FRONT BEZEL
MODEL RFMP - MINIATURE ELECTRONIC 5-DIGIT PROCESS METER
GENERAL DESCRIPTION
The FLEX MINI Series provides the user the ultimate in flexibility, from its
complete user programming to the optional setpoint control and communication
capability. The FLEX MINI accepts a DC voltage or current input signal and
provides a display in the desired unit of measure. The meter also features
minimum and maximum display capture, display offset, units indicator, and
programmable user input. The display can be toggled either manually or
automatically between the selected displays.
The FLEX MINI display has 0.48" (12.2 mm) high digits. The LCD is
available in two versions, reflective or red/green backlight. The backlight
version is user selectable for the desired color and also has variable display
intensity.
The capability of the FLEX MINI can be easily expanded with the addition
of option cards. The setpoint output cards are field installable with programmable
setpoints. Serial communications capability for RS232 or RS485 can be added
with a serial option card.
The FLEX MINI can be powered from an optional Veeder Root Micro-Line/
Sensor Power Supply (MLPS), which attaches directly to the back of a FLEX
MINI. The MLPS is powered from 85 to 250 VAC and provides up to 400 mA
to drive the unit and sensors.
INPUT
The FLEX MINI is a DC Process meter. It features voltage and current input
ranges, that are selected by the user via a programming jumper and software
input range selection. The ranges consist of the following: 0 to 10 V, 0(4) to 20
mA, or 0 to 50 mA. Users should select the appropriate voltage range that
covers their maximum input.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in this
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use this meter to directly command motors, valves, or other actuators
not equipped with safeguards. To do so can be potentially harmful to persons or
equipment in the event of a fault to the meter.
Bulletin No. RFMO-G
Drawing No. LP0655
Released 12/12
Danaher Specialty Products
1-800-390-6405
www.danaherspecialtyproducts.com/Veeder-Root
CAUTION: Risk of Danger.
Read complete instructions prior to
installationand operation of the unit.
CAUTION:
Risk of electric shock.
DIMENSIONS In inches (mm)
Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.15" (54.6) H x 3.00" (76.2) W.
C
US LISTED
UL
R
51EB
IND. CONT. EQ.
.13 (3.3)
(43.4)
1.71
2.95 (74.9)
SEL
.15 (3.8)
1.54 (39.1)
RST
(68 )
+.025
-.000
+8
-0
1.29 (32.8)
2.68
-.000
1.30
(33 )
-0
+6
+.024
